Reports For Plate Number OBY071 In Kansas, United States

Reports

Pictures

Video

Comments

Recalls

Related Websites

1988 CHEVROLET BERETTA

OBY071 license plate is registered to a 1988 CHEVROLET BERETTA in Kansas state. This CHEVROLET BERETTA is a and is manufactured by .

Body Class

Vehicle Type

Manufacturer

Reports

Details about 1988 CHEVROLET BERETTA

General Information

Violations & Citations

No violations & citations found for plate number OBY071 in Kansas, United States.

Pictures

No pictures found for plate number OBY071 in Kansas, United States.

Add a picture

Videos

No videos found for plate number OBY071 in Kansas, United States.

Add a video

Vehicle Registration & Background

Information linked to license plate number OBY071 registered in Kansas state may be available on the Info Trader premium report, click the button to be redirected to their website.

Number of previous owners

Title history and status changes

States and years of registration

Sales History

Click to View More Details Sponsored

Vehicle History Information

Accident history

Salvage and other branded titles

Sale history

Manufacturer recalls

Market value and estimated ownership costs

Search vehicle history

Accident Attorney

Recommended Accident Attorney in Kansas

Have you been injured in an accident involving OBY071 or another vehicle? Speak to a car accident attorney in Kansas today by calling the accident hotline below.

877-755-2189

Related Websites

No websites found for plate number OBY071 in Kansas, United States.

Add a related website

Recalls

CHEVROLET BERETTA 1988

1. FUEL SYSTEM, GASOLINE

Component Description FUEL SYSTEM, GASOLINE

Manufacturer That Filed Defect/noncompliance Report HONEYWELL INTERNATIONAL, INC.

Begin Date Of Manufacturing 0

End Date Of Manufacturing 0

Vehicle, Equipment Or Tire Report 0

Potential Number Of Units Affected 88303

Date Owner Notified By MFR 20061018

Recall Initiator (MFR/OVSC/ODI) MFR

Mfg General Motors LLC

Report Received Date 20060519

Record Creation Date 20060522

Regulation Part Number

Defect Summary CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.

Consequence Summary THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.

Corrective Summary HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).

Recall Notes THIS RECALL ONLY PERTAINS TO AFTERMARKET FRAM FUEL FILTERS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE VEHICLES LISTED.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.

2. SEAT BELTS

Component Description SEAT BELTS

Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.

Begin Date Of Manufacturing 19880101

End Date Of Manufacturing 19900701

Vehicle, Equipment Or Tire Report 0

Potential Number Of Units Affected 722884

Date Owner Notified By MFR 19911218

Recall Initiator (MFR/OVSC/ODI) MFR

Mfg General Motors LLC

Report Received Date 19911126

Record Creation Date 19911126

Regulation Part Number

Defect Summary THE FRONT SHOULDER BELT RETRACTORS MAY HAVE REDUCED SENSITIVITY OF THE LOCK-UP FEATURE AND WOULD NOT FUNCTION IN A SUDDEN DECELERATION OR CRASH.

Consequence Summary FAILURE OF THE SHOULDER BELT RETRACTOR WOULD RESULT INTHE SEAT OCCUPANT ONLY BEING RESTRAINED BY THE LAP BELT IN A CRASH OR SUDDENSTOP, AND AN INCREASED POSSIBILITY OF INJURY.

Corrective Summary

Recall Notes SYSTEM: SAFETY BELTS (PASSIVE RESTRAINT).VEHICLE DESCRIPTION: PASSENGER CARS EQUIPPED WITH DOOR MOUNTED SHOULDER AND LAPSAFETY BELT SYSTEMS.CORECTIVE ACTION: REPLACE THE FRONT SHOULDER BELT RETRACTORS AND ASSEMBLIES.

3. STRUCTURE : BODY : HOOD

Component Description STRUCTURE:BODY:HOOD

Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.

Begin Date Of Manufacturing 19860601

End Date Of Manufacturing 19871101

Vehicle, Equipment Or Tire Report 0

Potential Number Of Units Affected 290408

Date Owner Notified By MFR 19911021

Recall Initiator (MFR/OVSC/ODI) ODI

Mfg General Motors LLC

Report Received Date 19910819

Record Creation Date 19910826

Regulation Part Number

Defect Summary SECONDARY HOOD LATCH ASSEMBLY ON THESE VEHICLES MAY NOT BE PROPERLY ADJUSTED AND COULD BECOME BENT. THIS WILL LEAD TO A CONDITION WHERE FULL PRIMARY LATCH ENGAGEMENT IS NOT ATTAINED.

Consequence Summary A BENT SECONDARY HOOD LATCH COULD LEAD TO THE PRIMARYLATCH NOT BEING FULLY ENGAGED, ALLOWING THE HOOD TO UNEXPECTEDLY OPEN. IF THISWERE TO OCCUR WHILE THE VEHICLE WAS IN MOTION, THE HOOD MAY CONTACT THEWINDSHIELD, REDUCING THE FORWARD VISION AREA OF THE DRIVER AND A VEHICLE CRASHCOULD OCCUR WITHOUT PRIOR WARNING.

Corrective Summary REPLACE THE PRIMARY HOOD LATCH ASSEMBLY, THE SECONDARY HOOD LATCH ASSEMBLY, AND THE SUPPORT BRACKET.

Recall Notes SYSTEM: HOOD.VEHICLE DESCRIPTION: PASSENGER VEHICLES.

4. STRUCTURE : BODY : DOOR : HINGE AND ATTACHMENTS

Component Description STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS

Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.

Begin Date Of Manufacturing 19861001

End Date Of Manufacturing 19870801

Vehicle, Equipment Or Tire Report 0

Potential Number Of Units Affected 170769

Date Owner Notified By MFR 19891208

Recall Initiator (MFR/OVSC/ODI) ODI

Mfg General Motors LLC

Report Received Date 19891218

Record Creation Date 19900102

Regulation Part Number

Defect Summary A DOOR HINGE (UPPER OR LOWER) MAY BREAK WHILE OPENING OR CLOSING THE DOOR MAKING IT DIFFICULT TO REPOSITION AND CLOSE PROPERLY.

Consequence Summary HINGE SEPARATION MAY REDUCE THE STRUCTURAL INTEGRITY OFTHE SIDE OF THE CAR AND INCREASE RISK OF INJURY IN CERTAIN TYPES OF ACCIDENTS.

Corrective Summary REPLACE DOOR HINGES ON BOTH DOORS.

Recall Notes SYSTEM: DOOR HINGES.VEHICLE DESCRIPTION: PASSENGER CARS.

5. LATCHES / LOCKS / LINKAGES : HOOD : LATCH

Component Description LATCHES/LOCKS/LINKAGES:HOOD:LATCH

Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.

Begin Date Of Manufacturing 19861101

End Date Of Manufacturing 19871101

Vehicle, Equipment Or Tire Report 0

Potential Number Of Units Affected 282052

Date Owner Notified By MFR 19880426

Recall Initiator (MFR/OVSC/ODI) MFR

Mfg General Motors LLC

Report Received Date 19880323

Record Creation Date 19880328

Regulation Part Number

Defect Summary SECONDARY HOOD LATCH ASSEMBLY MAY NOT HAVE BEEN PROPERLY ADJUSTED RESULTING IN LATCH BECOMING BENT.

Consequence Summary A BENT SECONDARY HOOD LATCH COULD CAUSE THE PRIMARYLATCH TO MALFUNCTION. IF THIS OCCURED THE HOOD COULD UNEXPECTEDLY OPEN. IFTHIS HAPPENED WHILE VEHICLE IS IN MOTION REDUCTION OF FORWARD VISIBILITY COULDCAUSE A VEHICLE CRASH WITHOUT PRIOR WARNING.

Corrective Summary INSPECT AND REPLACE SECONDARY HOOD LATCH ASSEMBLIES AS REQUIRED.

Recall Notes SYSTEM: HOOD LATCH/SECONDARY.VEHICLE DESCRIPTION: PASSENGER CARS.

Comments

No comments found for plate number OBY071 in Kansas, United States.

#OBY071