Add Report Add Picture Add Video Add Link
License Plate Lookup

#SMASH

New Hampshire, United States
View More Details
Reports
2
 Pictures
2
 Video
0
 Comments
0
 Recalls
4
 Related Websites
0
honda logo
2003 honda vtx1800c-vtx photo
SMASH license plate in NH state

2003 HONDA VTX1800C (VTX)

SMASH license plate is registered to a 2003 HONDA VTX1800C (VTX) in New Hampshire state. This HONDA VTX1800C (VTX) is a and is manufactured by HONDA DEVELOPMENT & MANUFACTURING OF AMERICA, LLC.
Body Class
Vehicle Type MOTORCYCLE
Manufacturer HONDA DEVELOPMENT & MANUFACTURING OF AMERICA, LLC
Reports

Details about 2003 HONDA VTX1800C (VTX)

1

General Information

AdaptiveCruiseControl Not Applicable
AdaptiveDrivingBeam Not Applicable
AutoReverseSystem Not Applicable
AutomaticPedestrianAlertingSound Not Applicable
BedType Not Applicable
BlindSpotMon Not Applicable
BodyCabType Not Applicable
BodyClass Motorcycle - Custom
BusFloorConfigType Not Applicable
BusType Not Applicable
CAN AACN Not Applicable
CIB Not Applicable
DaytimeRunningLight Not Applicable
DestinationMarket 49 states (Except California)
DisplacementCC 1795
DisplacementCI 109.537620650
DisplacementL 1.795000
DynamicBrakeSupport Not Applicable
EDR Not Applicable
EngineCycles 4
EngineCylinders 2
EngineHP 107.0
EngineKW 79.78990
EngineModel SC46E-2100101
ErrorCode 0
ErrorText 0 - VIN decoded clean. Check Digit (9th position) is correct
ForwardCollisionWarning Not Applicable
FuelTypePrimary Gasoline
GVWR Class 1A: 3,000 lb or less (1,360 kg or less)
LaneDepartureWarning Not Applicable
LaneKeepSystem Not Applicable
LowerBeamHeadlampLightSource Not Applicable
Make HONDA
MakeID 474
Manufacturer HONDA DEVELOPMENT & MANUFACTURING OF AMERICA, LLC
ManufacturerId 988
Model VTX1800C (VTX)
ModelID 12548
ModelYear 2003
NCSABodyType Two Wheel Motorcycle (excluding motor scooters)
NCSAMake Honda
NCSAModel 750 cc or greater
ParkAssist Not Applicable
PedestrianAutomaticEmergencyBraking Not Applicable
PlantCity MARYSVILLE
PlantCompanyName HONDA OF AMERICA MFG. INC.
PlantCountry UNITED STATES (USA)
PlantState OHIO
RearCrossTrafficAlert Not Applicable
RearVisibilitySystem Not Applicable
SemiautomaticHeadlampBeamSwitching Not Applicable
TrailerBodyType Not Applicable
TrailerType Not Applicable
VehicleType MOTORCYCLE

2013 HYUNDAI Elantra

SMASH license plate is registered to a 2013 HYUNDAI Elantra in New Hampshire state. This HYUNDAI Elantra is a Sedan 4D and is manufactured by HYUNDAI-KIA AMERICA TECHNICAL CENTER INC (HATCI).
Body Class Sedan 4D
Vehicle Type PASSENGER CAR
Manufacturer HYUNDAI-KIA AMERICA TECHNICAL CENTER INC (HATCI)
Reports

Details about 2013 HYUNDAI Elantra

2

General Information

AirBagLocCurtain 1st & 2nd Rows
AirBagLocFront 1st Row (Driver & Passenger)
AirBagLocSide 1st Row (Driver & Passenger)
BedType Not Applicable
BodyCabType Not Applicable
BodyClass Sedan/Saloon
BusFloorConfigType Not Applicable
BusType Not Applicable
CustomMotorcycleType Not Applicable
DisplacementCC 1800.0
DisplacementCI 109.84273937051
DisplacementL 1.8
Doors 4
EngineCylinders 4
ErrorCode 0
ErrorText 0 - VIN decoded clean. Check Digit (9th position) is correct
FuelInjectionType Multipoint Fuel Injection (MPFI)
FuelTypePrimary Gasoline
Make HYUNDAI
MakeID 498
Manufacturer HYUNDAI-KIA AMERICA TECHNICAL CENTER INC (HATCI)
ManufacturerId 1034
Model Elantra
ModelID 2735
ModelYear 2013
MotorcycleChassisType Not Applicable
MotorcycleSuspensionType Not Applicable
NCSABodyType 4-door sedan, hardtop
NCSAMake Hyundai
NCSAModel Elantra
PlantCompanyName Hyundai Motor Manufacturing Alabama
PlantCountry UNITED STATES (USA)
PlantState ALABAMA
SeatBeltsAll Manual
Series GLS/GLS Preferred/ Limited/Limited Tech GS/SE/SE Tech
Series2 UD
TPMS Direct
TrailerBodyType Not Applicable
TrailerType Not Applicable
ValveTrainDesign Dual Overhead Cam (DOHC)
VehicleType PASSENGER CAR
Violations & Citations

Violations & Citations

0
No violations & citations found for plate number SMASH in New Hampshire, United States.
Pictures

Pictures

2
Videos

Videos

0
No videos found for plate number SMASH in New Hampshire, United States.
Add a video
Vehicle Registration & Background

Vehicle Registration & Background

Information linked to license plate number SMASH registered in New Hampshire state may be available on the Info Trader premium report, click the button to be redirected to their website.
Number of previous owners
Title history and status changes
States and years of registration
Sales History
Click to View More Details Sponsored
Vehicle History Information

Vehicle History Information

Accident history
Salvage and other branded titles
Sale history
Manufacturer recalls
Market value and estimated ownership costs
Search vehicle history
Accident Attorney

Recommended Accident Attorney in New Hampshire

Have you been injured in an accident involving SMASH or another vehicle? Speak to a car accident attorney in New Hampshire today by calling the accident hotline below.
877-755-2189
Related Websites

Related Websites

0
No websites found for plate number SMASH in New Hampshire, United States.
Add a related website
Recalls

Recalls

2
1
HONDA VTX1800C (VTX) 2003
2
HYUNDAI Elantra 2013
1. SERVICE BRAKES, HYDRAULIC : PEDALS AND LINKAGES
Component Description SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Manufacturer That Filed Defect/noncompliance Report Hyundai Motor America
Begin Date Of Manufacturing 20120502
End Date Of Manufacturing 20140228
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 390467
Date Owner Notified By MFR 20180115
Recall Initiator (MFR/OVSC/ODI) MFR
Mfg Hyundai Motor America
Report Received Date 20171130
Record Creation Date 20171204
Regulation Part Number
Defect Summary Hyundai Motor Company (Hyundai) is recalling certain 2013-2014 Elantra sedan, coupe and GT vehicles. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released. This will allow the brake lights to remain illuminated continuously. It can also allow the shift lever to be moved without depressing the brake pedal, or activate the engine management brake pedal override feature.
Consequence Summary If the brake light switch plunger does not retract as it should when the brake pedal is not being pressed, the brake lights may stay illuminated preventing accurate communication to following vehicles that the vehicle is slowing or stopping. Additionally, if the brake switch plunger is not retracted, then the transmission can be shifted out of PARK without depressing the brake pedal. Either condition increases the risk of a crash.
Corrective Summary Hyundai will notify owners, and dealers will replace the brake pedal stopper pad, free of charge. The recall is expected to begin February 8, 2018. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 170. This campaign expands recall 16V574.
Recall Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2. SERVICE BRAKES, HYDRAULIC : SWITCHES : BRAKE LIGHT
Component Description SERVICE BRAKES, HYDRAULIC:SWITCHES:BRAKE LIGHT
Manufacturer That Filed Defect/noncompliance Report Hyundai Motor America
Begin Date Of Manufacturing 20121201
End Date Of Manufacturing 20130430
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 64500
Date Owner Notified By MFR 20160926
Recall Initiator (MFR/OVSC/ODI) MFR
Mfg Hyundai Motor America
Report Received Date 20160802
Record Creation Date 20160802
Regulation Part Number
Defect Summary Hyundai Motor America (Hyundai) is recalling certain model 2013 Elantra vehicles manufactured December 1, 2012, to April 30, 2013. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released.
Consequence Summary If the brake light switch plunger does not retract as it should when the brake pedal is not being pressed, the brake lights may stay illuminated preventing accurate communication to following vehicles that the vehicle is slowing or stopping. Additionally, if the brake switch plunger is not retracted, then the transmission can be shifted out of PARK without depressing the brake pedal. Either condition increases the risk of a crash.
Corrective Summary Hyundai will notify owners, and dealers will replace the brake pedal stopper pad with an improved part, free of charge. The recall is expected to begin on September 30, 2016. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 146.
Recall Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
3. AIR BAGS : SIDE / WINDOW
Component Description AIR BAGS:SIDE/WINDOW
Manufacturer That Filed Defect/noncompliance Report Hyundai Motor Company
Begin Date Of Manufacturing 20101112
End Date Of Manufacturing 20130305
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 186250
Date Owner Notified By MFR 20130423
Recall Initiator (MFR/OVSC/ODI) ODI
Mfg Hyundai Motor America
Report Received Date 20130401
Record Creation Date 20130401
Regulation Part Number
Defect Summary Hyundai Motor Company is recalling certain model year 2011-2013 Elantra vehicles manufactured from November 12, 2010, through March 5, 2013. A support bracket attached to the headliner may become displaced during a side curtain airbag deployment.
Consequence Summary If the headliner support bracket makes contact with an occupant during a crash, it may cause a laceration injury.
Corrective Summary Hyundai will notify owners, and dealers will apply adhesive strips to the headliner, free of charge. The safety recall began during April 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 109.
Recall Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
4. STRUCTURE
Component Description STRUCTURE
Manufacturer That Filed Defect/noncompliance Report Hyundai Motor Company
Begin Date Of Manufacturing 20101112
End Date Of Manufacturing 20130305
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 186250
Date Owner Notified By MFR 20130423
Recall Initiator (MFR/OVSC/ODI) ODI
Mfg Hyundai Motor America
Report Received Date 20130401
Record Creation Date 20130401
Regulation Part Number
Defect Summary Hyundai Motor Company is recalling certain model year 2011-2013 Elantra vehicles manufactured from November 12, 2010, through March 5, 2013. A support bracket attached to the headliner may become displaced during a side curtain airbag deployment.
Consequence Summary If the headliner support bracket makes contact with an occupant during a crash, it may cause a laceration injury.
Corrective Summary Hyundai will notify owners, and dealers will apply adhesive strips to the headliner, free of charge. The safety recall began during April 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 109.
Recall Notes Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Comments

Comments

0
No comments found for plate number SMASH in New Hampshire, United States.
Leave Reply

Leave Reply

Reports

Previously searched
license plates

839Y05 Maryland License Plate
839Y05 Maryland License Plate Information
CHM8312 Michigan License Plate
CHM8312 Michigan License Plate Information
373GP Florida License Plate
373GP Florida License Plate Information
ZKY729 Louisiana License Plate
ZKY729 Louisiana License Plate Information