Add Report Add Picture Add Video Add Link
License Plate Lookup

#HTG1799

New York, United States
View More Details
Reports
3
 Pictures
3
 Video
0
 Comments
0
 Recalls
11
 Related Websites
0
chevrolet logo
1993 chevrolet gmt-400 photo
HTG1799 license plate in NY state

1993 CHEVROLET GMT-400

HTG1799 license plate is registered to a 1993 CHEVROLET GMT-400 in New York state. This CHEVROLET GMT-400 is a Regular Cab 2D and is manufactured by GENERAL MOTORS LLC.
Body Class Regular Cab 2D
Vehicle Type TRUCK
Manufacturer GENERAL MOTORS LLC
Reports

Details about 1993 CHEVROLET GMT-400

1

General Information

BodyClass Pickup
BrakeSystemType Hydraulic
BusFloorConfigType Not Applicable
BusType Not Applicable
CustomMotorcycleType Not Applicable
DisplacementCC 5700.0
DisplacementCI 347.83534133997
DisplacementL 5.7
Doors 2
DriveType 4WD/4-Wheel Drive/4x4
EngineConfiguration V-Shaped
EngineCylinders 8
EngineManufacturer CPC
ErrorCode 0
ErrorText 0 - VIN decoded clean. Check Digit (9th position) is correct
FuelInjectionType Throttle Body Fuel Injection (TBI)
FuelTypePrimary Gasoline
GVWR Class 2E: 6,001 - 7,000 lb (2,722 - 3,175 kg)
Make CHEVROLET
Manufacturer GENERAL MOTORS LLC
ManufacturerId 984
Model GMT-400
ModelYear 1993
MotorcycleChassisType Not Applicable
MotorcycleSuspensionType Not Applicable
NCSABodyType Light Pickup
NCSAMake Chevrolet
NCSAModel C, K, R, V-series pickup/Silverado
OtherEngineInfo LPG conversion can be accomplished on the engine.
PlantCity FORT WAYNE
PlantCompanyName NA - Truck Platform
PlantCountry UNITED STATES (USA)
PlantState INDIANA
Series Conventional Cab
TrailerBodyType Not Applicable
TrailerType Not Applicable
Trim 1/2 ton nominal
VehicleType TRUCK

1997 CHEVROLET Blazer

HTG1799 license plate is registered to a 1997 CHEVROLET Blazer in New York state. This CHEVROLET Blazer is a SUV 4D and is manufactured by GENERAL MOTORS LLC.
Body Class SUV 4D
Vehicle Type MULTIPURPOSE PASSENGER VEHICLE (MPV)
Manufacturer GENERAL MOTORS LLC
Reports

Details about 1997 CHEVROLET Blazer

2

General Information

BodyClass Sport Utility Vehicle (SUV)/Multi-Purpose Vehicle (MPV)
BrakeSystemType Hydraulic
BusFloorConfigType Not Applicable
BusType Not Applicable
CustomMotorcycleType Not Applicable
DisplacementCC 4300.0
DisplacementCI 262.40209960734
DisplacementL 4.3
Doors 4
DriveType 4x2
EngineConfiguration V-Shaped
EngineCylinders 6
EngineManufacturer WRN
ErrorCode 0
ErrorText 0 - VIN decoded clean. Check Digit (9th position) is correct
FuelTypePrimary Gasoline
GVWR Class 1D: 5,001 - 6,000 lb (2,268 - 2,722 kg)
Make CHEVROLET
Manufacturer GENERAL MOTORS LLC
ManufacturerId 984
Model Blazer
ModelYear 1997
MotorcycleChassisType Not Applicable
MotorcycleSuspensionType Not Applicable
NCSABodyType Compact Utility (Utility Vehicle Categories "Small" and "Midsize")
NCSAMake Chevrolet
NCSAModel S-10 Blazer/TrailBlazer (2002 only; for 2003 on, see 403)
OtherEngineInfo CPI, 90 Degrees
PlantCity MORAINE
PlantCompanyName GM Truck Group
PlantCountry UNITED STATES (USA)
PlantState OHIO
Series Small Conventional Cab, 1500 (1/2 ton)
TrailerBodyType Not Applicable
TrailerType Not Applicable
VehicleType MULTIPURPOSE PASSENGER VEHICLE (MPV)

1996 BUICK Regal

HTG1799 license plate is registered to a 1996 BUICK Regal in New York state. This BUICK Regal is a Sedan 4D and is manufactured by GENERAL MOTORS LLC.
Body Class Sedan 4D
Vehicle Type PASSENGER CAR
Manufacturer GENERAL MOTORS LLC
Reports

Details about 1996 BUICK Regal

3

General Information

AirBagLocFront 1st Row (Driver & Passenger)
BedType Not Applicable
BodyCabType Not Applicable
BodyClass Sedan/Saloon
BusFloorConfigType Not Applicable
BusType Not Applicable
CustomMotorcycleType Not Applicable
DisplacementCC 3800.0
DisplacementCI 231.89022755998
DisplacementL 3.8
Doors 4
EngineConfiguration V-Shaped
EngineCylinders 6
EngineManufacturer FLT
EngineModel L36
ErrorCode 0
ErrorText 0 - VIN decoded clean. Check Digit (9th position) is correct
FuelInjectionType Multipoint Fuel Injection (MPFI)
Make BUICK
Manufacturer GENERAL MOTORS LLC
ManufacturerId 984
Model Regal
ModelYear 1996
MotorcycleChassisType Not Applicable
MotorcycleSuspensionType Not Applicable
NCSABodyType 4-door sedan, hardtop
NCSAMake Buick / Opel
NCSAModel Regal (FWD)
Note Body Type: Sedan, 4-6 Window, Notchback (GM codes: 19, 69)
OtherEngineInfo Name Plate: Chev, Pont, Olds, Buick
PlantCity OSHAWA #2
PlantCompanyName NA
PlantCountry CANADA
PlantState ONTARIO
SeatBeltsAll Manual
Series Custom
TrailerBodyType Not Applicable
TrailerType Not Applicable
VehicleType PASSENGER CAR
Windows 4
Violations & Citations

Violations & Citations

0
No violations & citations found for plate number HTG1799 in New York, United States.
Pictures

Pictures

3
Videos

Videos

0
No videos found for plate number HTG1799 in New York, United States.
Add a video
Vehicle Registration & Background

Vehicle Registration & Background

Information linked to license plate number HTG1799 registered in New York state may be available on the Info Trader premium report, click the button to be redirected to their website.
Number of previous owners
Title history and status changes
States and years of registration
Sales History
Click to View More Details Sponsored
Vehicle History Information

Vehicle History Information

Accident history
Salvage and other branded titles
Sale history
Manufacturer recalls
Market value and estimated ownership costs
Search vehicle history
Accident Attorney

Recommended Accident Attorney in New York

Have you been injured in an accident involving HTG1799 or another vehicle? Speak to a car accident attorney in New York today by calling the accident hotline below.
877-755-2189
Related Websites

Related Websites

0
No websites found for plate number HTG1799 in New York, United States.
Add a related website
Recalls

Recalls

3
1
CHEVROLET GMT-400 1993
2
CHEVROLET Blazer 1997
1. EXTERIOR LIGHTING
Component Description EXTERIOR LIGHTING
Manufacturer That Filed Defect/noncompliance Report SABERSPORT
Begin Date Of Manufacturing 0
End Date Of Manufacturing 0
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 16270
Date Owner Notified By MFR 20090511
Recall Initiator (MFR/OVSC/ODI) OVSC
Mfg General Motors LLC
Report Received Date 20090407
Record Creation Date 20090407
Regulation Part Number 571
Defect Summary SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Consequence Summary DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
Corrective Summary SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
Recall Notes THIS RECALL ONLY PERTAINS TO AFTERMARKET REPLACEMENT EQUIPMENT AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON VEHICLES PRODUCED BY THE VEHICLE MANUFACTURER.IN ORDER TO DETERMINE IF YOUR AFTERMARKET LAMP ASSEMBLY IS AFFECTED BY THIS NONCOMPLIANCE, PLEASE REVIEW THE LIST OF MODEL NUMBERS PROVIDED TO US BY SABERSPORT.THE LIST CAN BE FOUND UNDER "DOCUMENT SEARCH" LOCATED AT THE BOTTOM OF YOUR SCREEN.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
2. EXTERIOR LIGHTING : HEADLIGHTS
Component Description EXTERIOR LIGHTING:HEADLIGHTS
Manufacturer That Filed Defect/noncompliance Report ANZO USA, INC.
Begin Date Of Manufacturing 0
End Date Of Manufacturing 0
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 292000
Date Owner Notified By MFR 20060509
Recall Initiator (MFR/OVSC/ODI) OVSC
Mfg General Motors LLC
Report Received Date 20060313
Record Creation Date 20060314
Regulation Part Number 571
Defect Summary CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Consequence Summary WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH.
Corrective Summary ANZO WILL NOTIFY OWNERS AND REPLACE THE HEADLAMPS FREE OF CHARGE. THE RECALL BEGAN MAY 9, 2006. OWNERS MAY CONTACT ANZO USA AT 909-468-3688.
Recall Notes THIS RECALL ONLY PERTAINS TO AFTERMARKET HEADLAMP ASSEMBLIES MANUFACTURED BY ANZO AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED ON THE LISTED PASSENGER VEHICLES.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
3. SEAT BELTS : FRONT : BUCKLE ASSEMBLY
Component Description SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 19960301
End Date Of Manufacturing 19970630
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 312715
Date Owner Notified By MFR 20030808
Recall Initiator (MFR/OVSC/ODI) MFR
Mfg General Motors LLC
Report Received Date 20030331
Record Creation Date 20030401
Regulation Part Number
Defect Summary CERTAIN SPORT UTILITY VEHICLES WERE BUILT WITH A DRIVER'S SEAT BELT BUCKLE ASSEMBLY THAT CONTAINS AN ENERGY-ABSORBING LOOP. SUSTAINED LOADS OF SUFFICIENT MAGNITUDE AND DURATION ON THE BELT IN SEVERE CRASHES COULD FULLY DEPLOY THE BUCKLE ENERGY-ABSORBING LOOP, INTRODUCING A TOTAL OF 10 ADDITIONAL INCHES OF WEBBING INTO THE SEAT BELT SYSTEM. THE FREE FALLING LATCH PLATE USED IN THIS SYSTEM MAY ALLOW WEBBING TO DYNAMICALLY DISTRIBUTE BETWEEN THE LAP AND SHOULDER BELT AS THE DRIVER'S POSITION CHANGES DURING A MULTIPLE ROLLOVER EVENT.
Consequence Summary IF THE ENERGY-ABSORBING LOOP FULLY DEPLOYS IN A SEVERE MULTIPLE ROLLOVER CRASH, IT IS POSSIBLE THAT A BELTED DRIVER MAY EXPERIENCE PARTIAL OR EVEN COMPLETE EJECTION FROM THE VEHICLE.
Corrective Summary DEALERS WILL REPLACE THE ENERGY-ABSORBING SEAT BELT ASSEMBLIES WITH ONE THAT DOES NOT HAVE THE ENERGY-ABSORBING LOOP. OWNER NOTIFICATION BEGAN ON AUGUST 8, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020, GMC AT 1-800-462-8782, OR OLDSMOBILE AT 1-800-442-6537.
Recall Notes GM RECALL NO. 03020.CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
4. VISIBILITY : REARVIEW MIRRORS / DEVICES : EXTERIOR
Component Description VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 19960301
End Date Of Manufacturing 19970630
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 507171
Date Owner Notified By MFR 20030424
Recall Initiator (MFR/OVSC/ODI) ODI
Mfg General Motors LLC
Report Received Date 20030307
Record Creation Date 20030318
Regulation Part Number
Defect Summary CERTAIN SPORT UTILITY VEHICLES, MINI VANS, AND PICKUP TRUCKS MAY DEVELOP A SHORT CIRCUIT IN THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH.
Consequence Summary IF THIS WERE TO HAPPEN, IT COULD RESULT IN AN INOPERATIVE SWITCH, HEAT DAMAGE TO THE DRIVER'S DOOR, AND/OR IGNITION OF COMPONENTS IN THE DRIVER'S DOOR AND A SUBSEQUENT VEHICLE FIRE WITHOUT PRIOR WARNING.
Corrective Summary DEALERS WILL INSTALL A FUSED JUMPER HARNESS TO THE ELECTRIC OUTSIDE REARVIEW MIRROR SWITCH. OWNER NOTIFICATION BEGAN ON APRIL 24, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.
Recall Notes GM RECALL NO. 03006. CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
5. SUSPENSION : FRONT : CONTROL ARM : UPPER BALL JOINT
Component Description SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 0
End Date Of Manufacturing 0
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 0
Date Owner Notified By MFR 20011204
Recall Initiator (MFR/OVSC/ODI) ODI
Mfg General Motors LLC
Report Received Date 20011204
Record Creation Date 20020107
Regulation Part Number
Defect Summary THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. VEHICLE DESCRIPTION: 1996-1997 4-WHEEL DRIVE CHEVROLET BLAZER, GMC JIMMY, AND OLDSMOBILE BRAVADA SPORT UTILITY VEHICLES. SOME OWNERS HAVE HAD TO PAY FOR REPLACEMENT OF THE UPPER BALL JOINTS THAT HAVE SEPARATED. GM IS PROVIDING A SPECIAL POLICY TO THESE OWNERS TO COVER UPPER BALL JOINT REPLACEMENT IF THE CUSTOMER FOLLOWED THE RECOMMENDED MAINTENANCE SCHEDULE FOR THE CHASSIS LUBRICATION AND THE VEHICLE STILL REQUIRED THE REPLACEMENT OF THE UPPER BALL JOINTS DUE TO SEPARATION.
Consequence Summary THIS COULD CAUSE A LOSS OF STEERING CONTROL OF THE VEHICLE.
Corrective Summary GM HAS DECIDED TO CONDUCT A CUSTOMER SATISFACTION CAMPAIGN TO REPLACE THE UPPER BALL JOINTS ON AFFECTED VEHICLES. THIS SPECIAL POLICY IS FOR A PERIOD OF 8 YEARS OR 100,000 MILES, WHICHEVER OCCURS FIRST, FROM THE DATE THE VHEICLE WAS ORIGINALLY PLACED IN SERVICE, REGARDLESS OF OWNERSHIP. THE UPPER BALL JOINT REPLACEMENT, DUE TO SEPARATION, WILL BE MADE AT NO CHARGE TO THE CUSTOMER DURING THIS PERIOD. OWNERS CAN CONTACT CHEVROLET AT 1-800-222-1020, GMC AT 1-800-862-4389, OR OLDSMOBILE AT 1-800-442-6537, CONCERNING THIS PROGRAM.
Recall Notes
6. SUSPENSION : FRONT : CONTROL ARM : UPPER BALL JOINT
Component Description SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 19961001
End Date Of Manufacturing 19961031
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 48600
Date Owner Notified By MFR 20010904
Recall Initiator (MFR/OVSC/ODI) ODI
Mfg General Motors LLC
Report Received Date 20010628
Record Creation Date 20010702
Regulation Part Number
Defect Summary ON CERTAIN SPORT UTILITY VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WEST VIRGINIA, AND WISCONSIN, AND IN THE DISTRICT OF COLUMBIA. FAILURE OF AN UPPER CONTROL ARM BALL JOINT ASSEMBLY COULD OCCUR DUE TO CORROSION.
Consequence Summary THIS CAN RESULT IN IMPAIRED STEERING OR STEERING LOSS, OR A PARTIAL OR COMPLETE COLLAPSE OF THE FRONT SUSPENSION, INCREASING THE RISK OF A CRASH.
Corrective Summary DEALERS WILL REPLACE BOTH UPPER BALL JOINTS. OWNER NOTIFICATION BEGAN SEPTEMBER 4, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020, GMC AT 1-800-462-8782, OR OLDSMOBILE AT 1-800-442-6537.
Recall Notes ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
7. SEAT BELTS
Component Description SEAT BELTS
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 19960301
End Date Of Manufacturing 19970630
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 586058
Date Owner Notified By MFR 19970922
Recall Initiator (MFR/OVSC/ODI) ODI
Mfg General Motors LLC
Report Received Date 19970612
Record Creation Date 19970821
Regulation Part Number
Defect Summary VEHICLE DESCRIPTION: EXTENDED CAB PICKUP TRUCKS EQUIPPED WITH 60/40 FRONT BENCH SEATS AND EXTENDED CAB PICKUP TRUCKS AND 2-DOOR UTILITY VEHICLES EQUIPPED WITH MANUAL LOCKING RECLINER BUCKET SEATS. THE OUTBOARD SAFETY BELT WEBBING ON THE DRIVER'S AND/OR PASSENGER'S SEAT CAN SEPARATE DURING A FRONTAL IMPACT.
Consequence Summary IF A SEPARATION OCCURRED AND THERE WERE SECONDARY CRASH EVENTS OR VEHICLE ROLLOVER, THERE WOULD BE NO BELT RESTRAINT OF THE OCCUPANT AND INCREASED INJURIES COULD OCCUR.
Corrective Summary DEALERS WILL INSTALL A PROTECTIVE COVER OVER THE RECLINER MECHANISM.
Recall Notes OWNER NOTIFICATION:OWNER NOTIFICATION WILL BEGIN DURING SEPTEMBER 1997. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
3
BUICK Regal 1996
1. FUEL SYSTEM, OTHER : STORAGE : TANK ASSEMBLY : PRESSURE RELIEF DEVICES
Component Description FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES
Manufacturer That Filed Defect/noncompliance Report DELPHI
Begin Date Of Manufacturing 0
End Date Of Manufacturing 0
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 742
Date Owner Notified By MFR 20070427
Recall Initiator (MFR/OVSC/ODI) MFR
Mfg General Motors LLC
Report Received Date 20070312
Record Creation Date 20070312
Regulation Part Number
Defect Summary CERTAIN DELPHI FUEL PRESSURE REGULATORS, P/NOS. FP10020-11B1, FP10026-11B1, AND FP10027-11B1, SOLD AFTER JANUARY 9, 2007, AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE UNIVERSAL PRESSURE REGULATORS (UPR) WERE PRODUCED WITHOUT AN O'RING AND RETAINER.
Consequence Summary FUEL MAY LEAK, POSSIBLY RESULTING IN A FIRE.
Corrective Summary DELPHI WILL NOTIFY OWNERS AND REPLACE THE UPR FREE OF CHARGE. THE RECALL BEGAN ON APRIL 23, 2007. OWNERS CAN CONTACT DELPHI AT 877-411-8770.
Recall Notes THIS RECALL ONLY PERTAINS TO AFTERMARKET DELPHI FUEL PRESSURE REGULATORS AND HAS NO RELATION TO ANY ORIGINAL EQUIPMENT INSTALLED BY GENERAL MOTORS.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
2. STEERING : RACK AND PINION
Component Description STEERING:RACK AND PINION
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 19960101
End Date Of Manufacturing 19961031
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 750283
Date Owner Notified By MFR 20040205
Recall Initiator (MFR/OVSC/ODI) ODI
Mfg General Motors LLC
Report Received Date 20031211
Record Creation Date 20031218
Regulation Part Number
Defect Summary CERTAIN PASSENGER VEHICLES HAVE LOWER PINION BEARINGS IN THE POWER RACK AND PINION ASSEMBLY IN WHICH THE RETAINER TABS WERE NOT CRIMPED PROPERLY. THESE RETAINERS COULD FAIL AND PERMIT THE BALL BEARINGS TO ESCAPE.
Consequence Summary IF THIS OCCURS, THE PINION SHAFT CAN BE FORCED UPWARD DURING LEFT TURNS AND BACK DOWN AS THE STEERING WHEEL IS MOVED BACK AND TO THE RIGHT. IF THE PINION SHAFT MOVES FURTHER, THE DRIVER WILL NEED TO EXERT MORE EFFORT TO TURN THE STEERING WHEEL, SIMILAR TO A VEHICLE WITHOUT POWER ASSISTED STEERING. IF THE PINION SHAFT MOVES EVEN FURTHER, THE DRIVER WILL REQUIRE MUCH HIGHER EFFORT TO TURN LEFT AND MAY NOT BE ABLE TO TURN THE WHEEL AS MUCH AS INTENDED. WITH THE MAXIMUM PINION SHAFT MOVEMENT, WHICH REQUIRES INTERNAL GEAR COMPONENT DAMAGE, THE DRIVER CAN ENCOUNTER HIGH RESISTANCE TO TURNING LEFT, FOLLOWED BY UNINTENDED POWER ASSIST TO THE RIGHT. IN ANY OF THESE CONDITIONS, A CRASH COULD OCCUR.
Corrective Summary DEALERS WILL INSTALL A NEW LOWER PINION BEARING UNLESS INSPECT OF THE EXISTING BEARING INDICATES THAT REPLACEMENT OF THE GEAR ASSEMBLY IS NECESSARY. OWNER NOTIFICATION BEGAN ON FEBRUARY 5, 2004. OWNERS SHOULD CONTACT BUICK AT 1-866-608-8080; CHEVROLET AT 1-800-630-2438; OLDSMOBILE AT 1-800-630-6537; OR PONTIAC AT 1-800-620-7668.
Recall Notes GM RECALL NO. 03062.CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
3. FUEL SYSTEM, GASOLINE : FUEL INJECTION SYSTEM
Component Description FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 19950701
End Date Of Manufacturing 19960501
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 275811
Date Owner Notified By MFR 19960708
Recall Initiator (MFR/OVSC/ODI) MFR
Mfg General Motors LLC
Report Received Date 19960701
Record Creation Date 19960708
Regulation Part Number
Defect Summary A BACKFIRE DURING ENGINE STARTING CAN CAUSE BREAKAGE OF THE UPPER INTAKE MANIFOLD.
Consequence Summary THIS CONDITION CAN CAUSE A NO-START CONDITION AND POSSIBLY AN ENGINE COMPARTMENT FIRE.
Corrective Summary DEALERS WILL UPDATE THE POWERTRAIN CONTROL MODULE PROGRAMMING. UNTIL THE CAMPAIGN REPAIR IS MADE, THE VEHICLE HOOD SHOULD BE SHUT WHENEVER STARTING THE VEHICLE TO REDUCE THE CHANCE OF PERSONAL INJURY.
Recall Notes VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 3.8L V6 ENGINE. OWNER NOTIFICATION: OWNER NOTIFICATIONS BEGAN DURING JULY 1996. NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BUICK AT 1-800-521-7300; PONTIAC AT 1-800-762-2737; OR OLDSMOBILE AT 1-800-442-6537. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
4. SERVICE BRAKES, HYDRAULIC : FOUNDATION COMPONENTS : HOSES, LINES / PIPING, AND FITTINGS
Component Description SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer That Filed Defect/noncompliance Report GENERAL MOTORS CORP.
Begin Date Of Manufacturing 19950401
End Date Of Manufacturing 19951001
Vehicle, Equipment Or Tire Report 0
Potential Number Of Units Affected 43213
Date Owner Notified By MFR 19960422
Recall Initiator (MFR/OVSC/ODI) MFR
Mfg General Motors LLC
Report Received Date 19960419
Record Creation Date 19960422
Regulation Part Number
Defect Summary THE LEFT FRONT BRAKE LINE CAN CONTACT THE TRANSAXLE MOUNTING BRACKET OR ATTACHMENT BOLT.
Consequence Summary THIS CONDITION CAN CAUSE THE BRAKE LINE TO WEAR THROUGH, RESULTING IN LOSS OF BRAKE FLUID AND EVENTUAL LOSS OF ONE-HALF OF THE VEHICLE'S BRAKE SYSTEM, INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
Corrective Summary DEALERS WILL INSPECT THE VEHICLE FOR PROPER BRAKE LINE CLEARANCE AND REPOSITION THOSE BRAKE LINES FOUND TO HAVE LESS THAN MINIMAL CLEARANCE. ADDITIONALLY, THOSE BRAKE LINES FOUND TO HAVE AN INDENTATION CAUSED BY THE CONTACT WILL BE REPLACED AND PROPERLY ROUTED.
Recall Notes SYSTEM: BRAKES; HYDRAULIC; LINES.VEHICLE DESCRIPTION: PASSENGER VEHICLES. NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR BUICK AT 1-800-521-7300. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
Comments

Comments

0
No comments found for plate number HTG1799 in New York, United States.
Leave Reply

Leave Reply

Reports

Previously searched
license plates

HTG1798 New York License Plate
HTG1798 New York License Plate Information
LMS8707 Texas License Plate
LMS8707 Texas License Plate Information
HTG1794 New York License Plate
HTG1794 New York License Plate Information
LV87K2 Nevada License Plate
LV87K2 Nevada License Plate Information